Strong Corrosion Resistance Carbon Fiber Tube 3/8″ 9.5mm X 300mm

Product Description

Strong Corrosion Resistance Carbon Fiber Tube 9.5mm (3/8″) x 300mm

Carbon Fiber tube 9.5 mm (3/8″) x 300 mm excellent for thong hole lanyard tubes in knife handles. Also has many applications in craft and model-making activities.

Carbon fiber is a popular material as it has a high strength to weight ratio, a high tensile strength, is resistant to corrosion and very durable.

The best way to cut carbon fiber rod or tube is with a high speed abrasive cutoff wheel, or even against the edge of your belt grinder platen; not with a saw. Due to the nature of this material, it may splinter if you try to cut it with a saw, especially a hand saw, so care must be taken when cutting. Also, taping around the location of the cut will help prevent splintering.

WARNING: These tubes are unidirectional carbon fiber, not woven. They have very high stiffness but low crushing strength so great care must be taken when holding the part while cutting, and it is not recommended to clamp them.

Carbon fiber and composites

Carbon tubes may appear as simple items, but they happen to have special characteristics that make them versatile and suitable for a multitude of uses. They are made by using carbon fibers immersed in a polymer matrix: it is a composite material, which will have different properties depending on the characteristics required by the designer.

Carbon fiber: the raw material

Carbon fiber is a material with high mechanical strength, high tensile strength (a high Young’s modulus), a low density, as well as a high chemical and temperature resistance (source: Wikipedia, carbon fibers). It is produced through the pyrolysis of polymeric fibers (PAN) in a large oven within a controlled setting. That is where polymeric fibers made of polyacrylonitrile (PAN), known as the precursor, are simultaneously stretched and heated up to about 2000°, with an inert gas atmosphere to form carbon fibers through graphitization.

 
FAQ
1) How can I place an order?
A: You can contact us by email about your order details.
 
2) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T and Paypal
 
3) What's the order procedure?
A: First we discuss order details, production details by email or WhatsApp. Then we issue you a PI for your confirmation.
You will be requested to do prepaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 7-15days if we don't have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
 
4) How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We check the goods when they go into next step production procedure.

Our Service:
 
1. It ensures that a year of quality assurance and 24 hours online customer service.
2. Protection of your sales area, ideas of design, and all your private information.
3. Request for samples is accepted.
4. Drilling and slotting are accepted.
5. We guarantee the products to be manufactured with the finest materials and mature technics.
All tubes can be repaired at no charge if returned to us, postage prepaid, within one year.