Payment & Shipping Terms:
|Max Length Of Single Tube:||9000mm||Resin Type:||Epoxy Thermoset Resin|
|Maximum Wall Thickness:||50mm||The Material:||The Carbon Fiber|
|Specifications:||According To The Customer Request||Winding Angle:||Any Other Angle To Machanical Strength Requirement|
Supply of Filament Wound Carbon Fiber Tube 3k woven wrapping carbon fiber texture .
Carbon fiber composite material with the advantages of high strength, high modulus, low density, carbon
fiber has become one of the high performance of the most important.Carbon fiber composite material has
been widely used in aerospace, Marine, automotive, sports equipment and other fields, its important
1. Light weight, high strength
Its specific gravity 1.4 1.8 g/cm, is only a quarter of the steel, transportation and installation is very
convenient, compared with the plastic products, its strength is plastic products of dozens of times, so
remarkable characteristics is light weight, high strength carbon fiber composite materials.
2, corrosion resistance, anti-aging, long service life
Carbon fiber products to acid, alkali, salt, some organic solvents and other corrosive erosion, in the field
of corrosion protection has the incomparable superiority to other metals, and have good water resistance
and aging resistance, so no matter in corrosive environment and bad in the open air, wet environment
operation, its service life can reach more than 15 years.
The surface of the grain
Effect of surface
Drill, such as processing
Sports, unmanned aerial vehicles (uavs)
Carbon fiber winding of molding process
Winding molding process is soaked in resin adhesive solution of continuous fiber (or cloth belt, presoak
yarn) on winding to the mandrel according to certain rules, and then after curing, demoulding, obtain
products.According to the filament winding forming physical and chemical condition when the resin is
different, divided into dry winding, wet winding and half dry winding 3 kinds.(1) dry winding Dry winding
is adopted through presoak rubber processing presoak yarn or, on a winding machine after soften to
viscous flow winding onto the mandrel.Because of presoak yarn (or with) is a professional production, to
strictly control the resin content (accurate to 2%) and presoak yarn quality.Therefore, dry winding can
accurately control the quality of the product.Dry winding process is the biggest characteristic of high
production efficiency, winding speed can reach 100 ~ 100 m/min, winding machine cleaning, labor health
condition is good, high product quality.The downside is winding equipment is expensive, need to increase
in yarn manufacturing equipment, so the investment is bigger also, dry low interlaminar shear strength
of winding products.
(2) the wet winding Wet winding is fiber cluster (yarn belt), glue, directly under tension control winding
onto the mandrel.The advantages of wet winding for: (1) 40% lower cost than dry winding;(2) the product
has good air tightness, because of the winding tension to squeeze bubbles, the excess resin adhesive
liquid and fill gaps;(3) fiber arrangement good parallelism;(4) the wet winding, fiber resin adhesive
solution, can reduce the fiber abrasion;5. High efficiency (up to 200 m/min).Wet winding faults as follows:
(1) resin waste is big, poor operating environment;(2) gel content and quality of the finished product is
not easy to control;(3) less available for wet winding resin varieties.