Payment & Shipping Terms:
|Processing Size:||500MM*600MM||Precision:||High Precision|
|Nc Machining:||Yes||Weave:||Plain/twill/one-way Cloth|
|Surface Treament:||Matte/Glossy||Percentage Of Carbon Fiber:||100% Pure Carbon Fiber Or Carbon Wth Fiberglass|
Cnc machining service for multicopter Carbon Fiber CNC Service Chassis.
Carbon Fiber CNC with Countersink holes
Not only can Shanghai Lijin finish the rugular cutting and drilling feature, parts with Countersink holes
feature can be offered as well.
There are many subclasses in these directories need further elaboration.Such as different carbon fiber
stripe to produce different components and final product performance.
In order to create a carbon fiber part of tensile and compression are tough, needs a stable internal
structure building foundation and to maintain its shape.Epoxy resin is a kind of good compressive strength
and deformation of the excellent material, is often used to form the structure made of carbon fiber in the
structure reinforcement.As the density of resin small accordingly Light can be used to create the quality
of parts and very strong.
When making a components can use many different ways, including wet stack coating, vacuum bag
molding pressure, resin transfer, matching mould, insert molding, pultrusion and many other ways.
Carbon fiber advantage nc machining characteristics
High Corrosion Resistance
Excellent Structural Properties
UV Resistant Inhibited
Variety Of Colors For Choice
Consistent Cross Section
Non-Conductive Thermally And Electrically
Wide Temperature Range Use
Carbon fiber CNC machining
The comparison of strength, hardness and other materials
Carbon fiber is very strong, this is typical of the strength of the engineering material weight ratio and
stiffness to weight ratio, particularly in the increased weight can lead to a life cycle cost or not satisfied with
the performance of structure design.Hardness of a material is measure by its elasticity coefficient, the
coefficient of carbon fiber typical values 20 msi (138 Gpa), and its maximum tensile strength values are
typical 500 ksi (3.5 Gpa).High strength and hardness of carbon fiber material also has a higher application
value and can be through the professional heat treatment process.Compared with the 2024 - T3 aluminum
coefficient of typical values only 10 msi and the maximum tensile strength only 500 ksi typical values, and
the coefficient of 4130 steel typical values is 30 msi and the maximum tensile strength values are typical
As an example, a plain carbon fiber board has 6 msi elasticity coefficient and bulk density of 83 LBS/ft3.In
contrast, the density of aluminum is 169 LBS/ft3, its weight hardness is 8.8 x 108 ft.So even if an ordinary
plain the weight of the carbon fiber board hardness is higher than the aluminum 18% 14% higher than
steel.When considering a custom as well as the strength of the reinforced carbon fiber board at the same
time increase the strength and hardness of the core material, obviously advanced carbon fiber composite
materials can be applied to widely.
***Pictures shown below are only to display the carbon fiber CNC capability,experience and Quality from LijinCarbon.
LijnCarbon will NOT disclose or share any drawings or product detail to third parties.